Please use this identifier to cite or link to this item: http://repositorio.yachaytech.edu.ec/handle/123456789/895
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGallardo Aguilar, Andrea Michelle-
dc.contributor.authorÁvila Sosa, Edward Ebner-
dc.contributor.authorMorera Córdova, Vivian-
dc.contributor.authorViloria Vera, Dario Alfredo-
dc.contributor.authorRicaurte Fernández, Marvin José-
dc.contributor.authorTafur Guisao, Juan Pablo-
dc.date.accessioned2025-01-17T19:06:17Z-
dc.date.available2025-01-17T19:06:17Z-
dc.date.issued2021-05-17-
dc.identifier.urihttp://repositorio.yachaytech.edu.ec/handle/123456789/895-
dc.description.abstractIn this work, we report the mechanical properties of an alternative material based on a mixture of natural clay and ferruginous sand in pellet form for CO2 capture. These raw materials were collected from Ecuador, and they contain iron and titanium oxides from volcanic origin. To evaluate the effect of the sand content on the mechanical properties of pellets, the samples were manually prepared with 0 (control sample), 15, and 25 wt.% sand contents and analyzed using free-fall drop impact and uniaxial compression tests. The uniaxial compression test was carried out under three conditions: using sieved sand, using sand without sieving, and under wet conditions. The sand contents caused the drop number to decrease in the free-fall drop impact test. From the uniaxial compression test, the compressive strength, elastic modulus, and toughness were calculated. The elastic modulus showed a better performance for samples with lower porosity. The compressive strength demonstrated higher values for samples with 15 wt.% sand contents than for samples with the other sand contents. The toughness values did not significantly change. It was evidenced that the porosity, mineral composition, and humidity exerted an influence during the mechanical tests. The mineral phases were analyzed by X-ray diffraction, and quantitative analysis based on whole-powder-pattern fitting revealed that the iron and titanium oxide contents increased as the concentration of sand in the pellets increased.es
dc.language.isoenges
dc.rightsopenAccesses
dc.subjectCO2 adsorptiones
dc.subjectPelletses
dc.titleMechanical properties and X-ray diffraction analyses of clay/sand pellets for CO2 adsorption: the effects of sand content and humidityes
dc.typearticlees
dc.pagination.pages9 hojases
Appears in Collections:Artículos

Files in This Item:
File Description SizeFormat 
ogst-76-49.pdf1.91 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.